3. CLIENT MODE
Wi-Fi Protected Setup (WPS) Settings
Wi-Fi Protected Setup (WPS) is an optional certification program from the Wi-Fi
Alliance that is designed to ease the task of setting up and configuring security on a
wireless network.
Wireless Network Name (SSID)
The name of the wireless
network you want to PIN, also
called Service Set Identifier
(SSID).
Start PIN
Click this button to start WPS
configuration process if the client
device has a WPS PIN number.
Self-PIN Number
Displays the default PIN number of the travel router.
Push Button Configuration
Click the Start PBC button to start WPS configuration process if the client device has
a WPS button.
Once configuration is complete, click Apply to save and apply settings, or click
Cancel to cancel changes. The travel router will restart for new settings to take effect.
3.2.3 Advanced
The Advanced menu configurations greatly affect the operating performance of the
travel router. This menu is intended for advanced users. It is recommended to retain
the default settings. Do not change any of configurations if you are unsure about it.
Advanced Wireless Network Settings
RTS Threshold
The default and the
recommended value is
2346. Should you encounter
inconsistent data flow, only
minor adjustments should be
made.
Fragmentation Threshold
Fragmentation threshold refers to the amount of packets that will be fragmented
before transmission. The default and recommended value is 2346 bytes.
Preamble Type
Preamble is use to limit the packets of data for transmission. When the connection is
bad, it is recommended to use the Short Preamble.
Wireless Travel Router
Wireless Travel Router