Jeep Compass 2023 Owner's Manual page 207

What is the weight limit (child's weight + weight of the child
restraint) for using the LATCH anchorage system to attach the
child restraint?
Can the LATCH anchorages and the seat belt be used together to
attach a rear-facing or forward-facing child restraint?
Can a child seat be installed in the center position using the inner
LATCH lower anchorages from the outboard seating positions?
Can two child restraints be attached using a common lower
LATCH anchorage?
Can the rear-facing child restraint touch the back of the front
passenger seat?
Can the rear head restraints be removed?
Frequently Asked Questions About Installing Child Restraints With LATCH
65 lb (29.5 kg)
No
Yes
No
Yes
No
Use the LATCH anchorage system until the combined weight of
the child and the child restraint is 65 lb (29.5 kg). Use the seat
belt and tether anchor instead of the LATCH system once the
combined weight is more than 65 lb (29.5 kg).
Do not use the seat belt when you use the LATCH anchorage
system to attach a rear-facing or forward-facing child restraint.
Booster seats may be attached to the LATCH anchorages if
allowed by the booster seat manufacturer. See your booster seat
owner's manual for more information.
You can install child restraints with flexible lower anchors in the
center position. The inner anchorages are 16 inches (400 mm)
apart. Do not install child restraints with rigid lower anchors in the
center position.
Never "share" a LATCH anchorage with two or more child
restraints. If the center position does not have dedicated LATCH
lower anchorages, use the seat belt to install a child seat in the
center position next to a child seat using the LATCH anchorages in
an outboard position.
The child seat may touch the back of the front passenger seat if
the child restraint manufacturer also allows contact. See your
child restraint owner's manual for more information.
SAFETY 205
6