Jeep Compass 2023 Owner's Manual page 201

Customer Action
NOTE:
Each step MUST BE held for at least two seconds
8. Place turn signal in neutral state.
9. Turn left turn signal switch ON.
10. Turn left turn signal switch OFF. (Turn Signal Switch Must be placed in Neutral State).
11. Turn ignition STOP/OFF/LOCK.
12. Turn ignition MAR/ON/RUN. (Entire sequence needs to be completed within one
minute or sequence will need to be repeated).
Turn hazard flashers OFF (Manually).
If a reset procedure step is not completed within 60 seconds, then the turn signal lights will blink and the reset procedure must be performed again in order to be successful.
Customer Will See
Right turn light is OFF.
Left turn light BLINKS.
Right turn light is ON SOLID.
Left turn light is ON SOLID.
Right turn light is OFF.
Left turn light is OFF.
System is now reset and the engine may be started.
SAFETY 199
6