Jeep Compass 2023 Owner's Manual page 158

156 MULTIMEDIA
Lights
When the Lights button is pressed on the touchscreen, the system displays the options related to the vehicle's exterior and interior lights.
NOTE:
 When the "Daytime Running Lights" feature is selected, the daytime running lights can be turned on or off. This feature is only allowed by law in the country of the vehicle purchase.
 Depending on the vehicle's options, feature settings may vary.
Headlight Sensitivity
Headlight Off Delay
Headlight Illumination On Approach
Auto Dim High Beams
Greeting Lights
Daytime Running Lights
Cornering Lights
Headlight Dip
Flash Lights With Lock
Setting Name
This setting will allow you to set the sensitivity of the headlights depending on the amount
of visible light. The greater the sensitivity set, the less the external light variation required
to turn on the lights (e.g. with a setting on level 3 at sunset, the headlights turn on earlier
than in levels 1 and 2). The available levels are "Level 1: Minimum Sensitivity", "Level 2:
Medium Sensitivity", and "Level 3: Maximum Sensitivity".
This setting will allow you to set the amount of time it takes for the headlights to shut off
after the vehicle is turned off. The available settings are "0 sec", "30 sec", "60 sec", and
"90 sec".
This setting will allow you to set the amount of time it takes for the headlights to shut off
after the vehicle is unlocked. The available settings are "0 sec", "30 sec", "60 sec", and
"90 sec".
This setting will allow you to turn the Auto Dim High Beams on or off.
This setting will turn the Greeting Lights on or off.
This setting will allow you to turn the Daytime Running Lights on or off.
When this setting is selected, if the steering wheel rotation angle is large or the turn
signal indicators are on, a light (incorporated in the fog light) will turn on, on the relevant
side to improve visibility at night.
This setting will lower the headlights when driving on the opposite side of the road.
The available options are "On" and "Off".
This setting will allow you to turn the flashing of the lights when the Lock button is
pushed on the key fob on or off.
Description