Concentric Pipe-Kit Assembly; Plus 9 - Icon Plus 9 - Steel 9) - Cadel AMARANTO 9 Installer Manual

Fig. 37 - Position of cast iron ring
6.11 CONCENTRIC PIPE-KIT ASSEMBLY (LIFE 9 - CRISTAL PLUS 9 - ICON PLUS 9 - STEEL 9)
The stove is designed to have the upper exhaust using a dedicated kit.
The upper exhaust requires 1 kit code 5022001 (optional).
To assemble the kit, proceed as follows:
• Remove the rear cap near the smoke outlets (see Fig. 38).
• Fold the upper exhaust support tabs down (see Fig. 39).
Fig. 38 - Remove the cap Fig. 39 - Fold the tabs
• Take the kit (see Fig. 40) and couple the pipe to the outlet of the smoke outlet of the stove (see Fig. 41).
• Fix the pipe to the support with the clamp provided (see Fig. 42)
• The stove is ready to be connected to the flue.
Fig. 40 - Upper exhaust kit Fig. 41 - Insert pipe d.80 mm Fig. 42 - Block with clamp
19
CRISTAL 9 - CRISTAL PLUS 9 - ICON PLUS 9 - AMARANTO 9 - LIFE 9 - STEEL 9 - ELANE 9