Table of Contents
Advertisement
6.16 INSTALLATION OF THE FUMES OUTLET CONCENTRIC PIPE SHARP/LEE/CRISTAL/ONE/BEAM/
ACCENT/PERLA/SWEET/LORD
Install the concentric pipe Ø 80/130 mm complete with T fitting (see Fig. 49)
Connect the combustion air pipe Ø 60 mm (see Fig. 50)
Fig. 49 - Phase 1
6.17 INSTALLATION OF CONCENTRIC SMOKE OUTLET WITH COMBUSTION AIR DECOUPLED (ONLY
MODELS CHROME/ROUND/FLOYD/SOUND)
The stove is designed to be connected to the flue by means of a concentric hose, through the specific preinstalled fitting.
If different requirements make it necessary to withdraw combustion air directly from an outside wall, the air hose can be decou-
pled from the concentric fitting.
Proceed as follows:
• Remove the rear casing from the stove (see Fig. 51).
• Break the precut ring with a pair of pliers (see Fig. 52).
• Pull off the flexible hose (combustion air) from the concentric fitting, unscrewing the metal clamp (see Fig. 53).
22
Fig. 48 - SHARP rear exhaust
Fig. 50 - Phase 2
Stufe a pellet
Advertisement
Table of Contents
