Cristal Plus 9 - Icon Plus 9 - Cadel AMARANTO 9 Installer Manual

6.13.1 Ducting solutions depending on the model: CRISTAL PLUS 9 - ICON PLUS 9
SOLUTION A: ducting with the rear hot air outlet
Fig. 55 - Diverter removal Fig. 56 - Insert pipe
• Remove the air diverter (see Fig. 55).
• The stove is ready to be ducted, position the pipe as shown in the photo (see Fig. 56).
SOLUTION B: ducting with the upper hot air outlet.
Top ducting requires 1 kit code 5020003 (optional).
Fig. 57 - Diverter removal Fig. 58 - Remove the cap Fig. 59 - Connect the flexible hose
• Remove the right side panel (see dedicated chapter).
• Remove the air diverter (see Fig. 57).
• Remove the upper cap where the ducting is to come out (see Fig. 58).
• Connect the flexible hose to the duct fan (see Fig. 59).
Fig. 60 - Block the flexible hose Fig. 61 - Connect pipe d.80 mm Fig. 62 - Fold the tabs
22
CRISTAL 9 - CRISTAL PLUS 9 - ICON PLUS 9 - AMARANTO 9 - LIFE 9 - STEEL 9 - ELANE 9