Using Qr Code Generator; Configuring Eco-Settings; Using Customer Support; Creating A Cloud Connector Profile - Lexmark MX822adxe User Manual

Setting up and using the home screen applications

Using QR Code Generator

Notes:
•
This application is supported only in some printer models. For more information, see
applications" on page
•
You may need administrative rights to access the application.
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click Apps > QR Code Generator > Configure.
3
Do either of the following:
•
Select a default QR code value.
•
Type a QR code value.
4
Apply the changes.
Configuring Eco‑Settings
Note: This application is supported only in some printer models. For more information, see
applications" on page
1
From the home screen, touch Eco‑Settings.
2
Configure the Eco‑Mode settings or schedule a power-saving mode.

Using Customer Support

Note: This application is supported only in some printer models. For more information, see
applications" on page
1
From the home screen, touch Customer Support.
2
Print or e‑mail the information.
Note: For information on configuring the application settings, see the Customer Support Administrator's
Guide.
Creating a Cloud Connector profile
Note: This application is available only in certain country or region. For more information, contact your
Lexmark representative.
1
From the home screen, touch Cloud Connector.
2
Select a cloud service provider.
20.
20.
20.
23
"Supported
"Supported
"Supported