Setting up and using the home screen applications
Configuring Eco‑Settings
1
From the home screen, touch Eco‑Settings.
2
Configure Eco‑Mode or Schedule Power Modes.
3
Apply the changes.
Using Customer Support
1
From the home screen, touch Customer Support.
2
Print or e‑mail the information.
Note: For information on configuring the application settings, see the Customer Support Administrator's
Guide.
Using QR Code Generator
You may need administrative rights to access the application.
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Apps > QR Code Generator > Configure.
3
Do either of the following:
•
Select a default QR code value.
•
Type a QR code value.
4
Apply the changes.
Setting up Scan Center
1
From the home screen, touch Scan Center.
2
Select and create a destination, and then configure the settings.
Notes:
•
When creating a network destination, make sure to validate and adjust the settings until no errors
occur.
•
Only destinations created from the Embedded Web Server are saved. For more information, see the
documentation that came with the solution.
3
Apply the changes.
20