Using Qr Code Generator; Using Google Drive - Lexmark XC8155 User Manual

Setting up and using the home screen applications
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Apps > Device Quotas > Configure.
3
From the User Accounts section, add or edit a user, and then set the user quota.
4
Apply the changes.
Note: For information on how to configure the application and its security settings, see the Device
Quotas Administrator's Guide.

Using QR Code Generator

You may need administrative rights to access the application.
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Apps > QR Code Generator > Configure.
3
Do either of the following:
•
Select a default QR code value.
•
Type a QR code value.
4
Apply the changes.

Using Google Drive

Scanning a document
Notes:
•
Make sure that the printer is connected to your Google account.
•
Make sure that you have installed a printer hard disk.
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, touch Google Drive.
3
If prompted, type your user credentials.
4
Select a destination folder.
5
Scan the document, and then follow the instructions on the display.
23