Adjusting The Balance Of The Feed Dog - JUKI NA-11UT Series Service Manual

C D E
[Fig. 1]
[Fig. 2]
[Fig. 3]
[Fig. 4]
22

Adjusting the Balance of the Feed Dog

Loosen the fixing screw
When the feed dog is at the highest position, turn the feed dog
turning shaft
with the needle plate.
Adjust the upper face
of the feed dog to be horizontal.
Tighten the fixing screw
for the feed dog support shaft.
to make the upside face of the feed dog horizontal
of the needle plate and the upper face
for the feed dog support shaft.