Replacement Of The Mes And The Setting - JUKI NA-11UT Series Service Manual

03
Thread Trimming Time
F D C
[Fig. 1]
[Fig. 2]
[Fig. 3]
[Fig. 4]

Replacement of the Mes and the Setting

Press the slide
Loosen the screw
Loosen the screw
presser foot
Press the thread trimming lever
Press the thread trimming lever. When the screw
mes is projected in the direction of the needle plate, loosen the
screw
in the direction of the arrow and disassemble it.
and disassemble the needle plate.
of the presser foot and disassemble the
.
in the direction of the arrow.
for the moving mes and replace it
Maintenance Book
for the moving
.
25