The Thread Retainer Setting - JUKI NA-11UT Series Service Manual

Thread Trimming Time
03
G H G
[Fig. 1]
[Fig. 2]
[Fig. 3]

The Thread Retainer Setting

Loosen the fixing screw for the thread retainer.
Move the thread retainer up and down to make sure that the
moving mes and the hook
and then tightly tighten the fixing screw .
The tread retainer should not interfere with the hook . While
the thread is trimmed, it should be located between the moving
mes and the hook without interrupting anything.
don t interfere with each other
Maintenance Book
29