Adjusting The Motion Range Of The Feed Dog - JUKI NA-11UT Series Service Manual

[Fig. 1]
[Fig. 2]
[Fig. 3]
[Fig. 4]
20

Adjusting the Motion Range of the Feed Dog

Lift the presser foot by turning the presser bar lifter .
Turn the dial
length at the maximum level ( mm).
Loosen the screw
full circle.
Manually turn the pulley. When the needle descends and the
center of the thread hole of the needle meets the face of the needle
plate, set the distance
dog groove at 2mm.
in the direction of the arrow and set the stitch
B
for the feed dog support base by turning it
between the back of the feed and the feed