Display Of The Connection Resources - Siemens SIMATIC ET 200AL System Manual

Distributed i/o system
Hide thumbs Also See for SIMATIC ET 200AL:
Table of Contents

Advertisement

Connection resources

11.3 Display of the connection resources

11.3
Display of the connection resources
Display of the connection resources in STEP 7 (offline view)
You can display the connection resources of an automation system in the hardware
configuration. You will find the connection resources in the Inspector window in the
properties of the CPU.
Figure 11-4
Example: Reserved and available connection resources (offline view)
Station-specific connection resources
The columns of the station-specific connection resources provide information about the used
and available connection resources of the station.
In the example, a maximum of 256 station-specific connection resources are available for the
automation system.
● 10 reserved connection resources, of which 4 are already in use and a further 6 available.
The used resources are divided up as follows:
– 4 Resources for HMI communication
● 246 dynamic connection resources, of which 81 are already in use and a further 165
available.
The used resources are divided up as follows:
– 6 resources for HMI communication
– 23 Resources for S7 communication
– 52 resources for Open User Communication
234
Function Manual, 12/2017, A5E03735815-AF
Communication

Advertisement

Table of Contents
loading

Table of Contents