Multiple Use Io Systems; What You Should Know About Multiple Use Io Systems - Siemens SIMATIC ET 200AL System Manual

Distributed i/o system

Hide thumbs Also See for SIMATIC ET 200AL:

Table of Contents

5.9 Standard machine projects

Additional information

For more information on multiple use IO systems, refer to section Multiple use IO systems

For more information on the configuration control for IO systems, refer to section

Configuration control for IO systems (Page 226).

For more information on configuration control, refer to the system manual S7-1500,

ET 200MP (http://support.automation.siemens.com/WW/view/en/59191792).

Multiple use IO systems

Multiple use automation solutions

For a flexible reusable automation solution as is the case with series machines, the following

use cases are typical:

● The machine (and therefore also the PROFINET IO system) is used more than once by

the customers.

● The machine is used in different plants by various customers.

For this to be possible, the automation solution must meet the following requirements:

● A project (configuration and program) can be loaded on various machines of the same

type without changes.

● Only a few easy adaptations need to be performed locally to integrate the machine into

an existing network infrastructure.

PROFINET with STEP 7 V15

Function Manual, 12/2017, A5E03444486-AH

Table of Contents