Operator Controls And Display Elements - Siemens SIMATIC ET 200eco PN M12-L Equipment Manual

Product overview

2.2 Operator controls and display elements

See also
You can find additional information on the accessories in the ET 200eco PN M12-L distributed
I/O system (https://support.industry.siemens.com/cs/ww/en/view/109778292) system
manual.
2.2 Operator controls and display elements
The figure below shows the operator controls and display elements of the
DQ 8x24VDC/0.5A M12‑L 8xM12 I/O device.
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
Figure 2-2 Operator controls and display elements
16
PN/MF RN/NS
(LAN)
ER/MS
MT/IO
X1 P1R
PWR
P1 LK
X1 P2R
P2 LK
X10
0
X11
1
X12
2
X13
3
X14
4
X15
5
X16
6
X17
7
MAC-ADD.;
SIMATIC ET 200eco PN
DQ 8x24VDC 0,5A
DC24V
IN - X80 X81 - OUT
PN/MF (LAN): Sockets for connecting MultiFieldbus
RN/NS: RUN/network status LED
ER/MS: ERROR/module status LED
MT/IO: MAINT/IO status LED
PWR: Power LED for load voltage 2L+
P1 LK/P2 LK: LINK port status LEDs
LED displays 0 to 7 for channel status/channel error
X10 to X17: Sockets for the output signal
X80: Connector for infeed of supply and load voltage
X81: Socket for loop-through of the supply and load voltage
I/O device digital outputs DQ 8x24VDC/0.5A M12-L 8xM12 (6ES7142-6BG00-0BB0)
0
1
Equipment Manual, 03/2023, A5E46570894-AD