Configuration Software Requirements - Siemens SIMATIC ET 200AL System Manual

2.5

Configuration software requirements

Introduction
Below please find a list of the software versions which support the "Time-based IO" function.
Requirements
Configuration software
STEP 7 (TIA Portal) as of
V13
S7-PCT as of V3.2
TIO instructions
The TIO instructions are specific function blocks for use of Time-based IO. The following TIO
instructions (Page 29) are available:
● TIO_SYNC
● TIO_IOLink_IN
● TIO_IOLink_OUT
● TIO_DI
● TIO_DQ
As of V13 Update 3, the TIO instructions are available as integrated instructions in
TIA Portal.
High-precision input/output with Time-based IO
Function Manual, 08/2014, A5E33454822-AB
Requirements
PROFINET IO IRT
•
For CM 4xIO-Link:
•
IO-Link technology
—
2.5 Configuration software requirements
Supported hardware components
S7-1500 automation system
•
ET 200SP and ET 200MP
•
distributed I/O systems
CM 4xIO-Link
•
TM Timer DIDQ 16x24V (as of
•
V13 Update 3)
TM Timer DIDQ 10x24V (as of
•
V13 Update 3)
CM 4xIO-Link
•
Time-based IO basics
Additional information
TIA Portal online help
S7-PCT online help
19