Operation
The controller is usually in automatic mode.
5.2 Schedules
The controller operates according to the schedules in automatic mode.
5.2.1
Setting the time and date
The current time and date need to be set immediately after start-up and after a power failure
lasting more than 24 hours. This is the case when the time blinks on the display.
10
¼ Activate editing mode for the control circuit. The operat-
ing mode is shown inverted on the display.
q Select the operating mode:
Automatic mode
Day mode
Night mode
System deactivated
¼ Confirm the operating mode.
Turn the rotary switch to
selected (gray background).
(time/date). The current time is
KA 5578-E EN