Power Connector Cable (Dc-In) - HP 240 G7 Maintenance And Service Manual

Power connector cable (DC-in)

Description
Power connector cable
Before removing the power connector cable, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the display (see
Remove the power connector cable:
1. Disconnect the power connector cable from the system board (1).
2. Remove the cable from the clip (2).
3. Remove the power connector cable out of the computer (3).
Reverse this procedure to install the power connector cable.
(Preparation for disassembly on page
Bottom cover on page
Battery on page 29).
Display assembly on page
27).
51).
Component replacement procedures
Spare part number
L23188-001
26).
49