Heat Sink Assembly - HP 250 G7 Maintenance And Service Manual

Heat sink assembly

Table 6-13 Spare part description and number
Description
Heat sink for use in models with i7-8565U, i5-8265U, i3-7020U processors and integrated discrete graphics
memory
Heat sink for use in models with i7-8565U, i5-8265U, i3-7020U processors and UMA graphics memory
Heat plate for use in fanless models with UMA graphics memory and an Intel Pentium or Celeron processor
Heat sink for use in models with an Intel Pentium or Celeron processor and discrete graphics memory
Heat sink for use in models with i7-8565U, i5-8265U processors and discrete graphics memory
Before removing the heat sink, follow these steps:
1. Prepare the computer for disassembly
2. Remove the optical drive (see
3. Remove the bottom cover (see
4. Remove the battery (see
To remove the heat sink assembly from products with integrated UMA graphics:
1. In the order indicated on the heat sink assembly, remove the four Phillips M2.0 × 3.0 screws (1) that
secure the heat sink to the computer.
2. Lift the heat sink assembly from the computer (2).
50 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
(Preparation for disassembly on page
Optical drive on page
Bottom cover on page
Battery on page 34).
29).
32).
Spare part number
L20469-001
L20470-001
L20472-001
L20471-001
L36498-001
28).