Table of Contents
Advertisement
7.
Separate the display from the computer (4).
Remove the display assembly subcomponents:
1.
To remove the hinge cover, pull upward near the hinge to disengage it from the display enclosure (1),
and then remove the hinge cover from the display enclosure (2).
Hinge covers are available using the following spare part numbers:
L49990-001: Asteroid silver
L49991-001: Dark ash silver
When replacing the hinge cover, make sure the hinges rotate downward as far as they can go. Align the
cover, and then start from above and rotate the cover downward onto the hinges. Make sure the clips
snap into place along the bottom of the display cover.
Component replacement procedures
55
Advertisement
Table of Contents
