Power Connector Cable (Dc-In) - HP 245 G7 Maintenance And Service Manual

Power connector cable (DC-in)

Table 5-14 Spare part description and number
Description
Power connector cable
Before removing the power connector cable, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the display (see
Remove the power connector cable:
1. Disconnect the power connector cable from the system board (1).
2. Remove the cable from the clip (2).
3. Remove the power connector cable from the computer (3).
Reverse this procedure to install the power connector cable.
48 Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Bottom cover on page
Battery on page 29).
Display assembly on page
27).
50).
Spare part number
L23188-001
26).