Power Connector Cable (Dc-In) - HP ProBook x360 11 G3 Education Edition Maintenance And Service Manual

Power connector cable (DC-in)

Table 5-11 Spare part description and number
Description
Power connector cable (included in Cable Kit)
Power connector cable bracket (included in Bracket Kit)
Before removing the power connector cable, follow these steps:
1. Prepare the computer for disassembly
2. Remove the keyboard/top cover (see
3. Remove the battery (see
Remove the power connector cable:
1. Disconnect the power connector cable from the system board (1).
2. Remove the Phillips M2.5 × 4.0 screw (2) that secures the power connector cable to the bottom cover.
3. Lift the bracket off the connector (3).
4. Use the cable to pull the connector out of the computer (4).
Reverse this procedure to install the power connector cable.
(Preparation for disassembly on page
Keyboard/top cover on page
Battery on page 33).
Spare part number
L43783-001
L43792-001
26).
26).
Component replacement procedures 41