Touchpad Module - HP 250 G7 Maintenance And Service Manual

TouchPad module

Table 6-11 Spare part description and number
Description
TouchPad module
TouchPad module cable
Before removing the TouchPad module, follow these steps:
1. Prepare the computer for disassembly
2. Remove the optical drive (see
3. Remove the bottom cover (see
4. Remove the battery (see
To remove the TouchPad module:
1. Disconnect the TouchPad cable from the ZIF connector on the TouchPad (1) and the TouchPad button
board cable from the ZIF connector on the system board (2).
2. Peel the tape off the TouchPad (1).
3. Starting in the corner, use a plastic, non-marking tool to pry up the TouchPad module to disengage the
adhesive that secures it to the top cover (2)
(Preparation for disassembly on page
Optical drive on page
Bottom cover on page
Battery on page 34).
29).
32).
Component replacement procedures
Spare part number
L20449-001
L20450-001
28).
47