Installing The Expansion Board - HP Cloudline CL2100 G3 806R User And Maintenance Manual

Installing the expansion board

Follow these steps to install the expansion board:
Identify the location of the riser slot to use for installation.
1.
Orient the PCIe card with the riser guide slot and insert the PCIe connector into the riser slot. Make
2.
sure the PCIe connector is flush in the slot.
Secure the PCIe card with the provided screw.
3.
Align the riser assembly with the slot on the server board. Make sure the front bracket of the riser
4.
assembly is seated correctly with the rear of the chassis.
Press the riser assembly until the connector on the riser board is flush in the slot of the server board.
5.
Secure the riser assembly with the provided screws.
6.
Install the access panel (on page 41).
7.
Installation 24