Installing An Expansion Board - HP ProLiant DL560 Gen10 User Manual

4 - Slimline
Optional Primary Riser Connector (Connected to Processor 1)
1 - ¾L/FH
2 - ¾L/FH
3 - ¾L/FH
1 - Slimline
Optional Secondary Riser Connector (Connected to Processor 2)
4 - HL/FH
5 - HL/FH
6 - HL/FH
1 - Slimline
Optional Tertiary Riser - Slots 7 and 8 (Connected to Processor 2)
1 - Slimline
2 - Slimline
Optional Tertiary Riser - Slots 7 and 8 (Connected to Processor 2)
7 - HL/FH
1 - Slimline
4-port NVMe mezzanine card slot descriptions
Optional 4-port NVMe mezzanine card (Connected to Processor 3)
1 - Slimline
2 - Slimline
3 - Slimline
4 - Slimline

Installing an expansion board

WARNING:
To reduce the risk of personal injury, electric shock, or damage to the equipment, remove the power
cord to remove power from the server. The front panel Power On/Standby button does not completely
shut off system power. Portions of the power supply and some internal circuitry remain active until AC
power is removed.
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless all PCI slots have
either an expansion slot cover or an expansion board installed.
NVMe slot riser 1
–
–
–
–
NVMe x8
–
–
–
–
–
–
–
–
NVMe slot riser 2
NVMe x8
–
–
–
–
–
–
–
NVMe x8
–
–
–
–
NVMe x8
NVMe x8
NVMe x8
NVMe x8
Installing an expansion board
NVMe slot riser 3
–
–
–
–
–
–
–
–
–
NVMe x8
NVMe x8
–
NVMe x8
77