Installing The M.2 Assembly - HP Cloudline CL2100 G3 806R User And Maintenance Manual

Installing the M.2 assembly

Follow these steps to install the M.2 assembly:
Insert the M.2 card.
1.
Lower the M.2 card in place.
2.
Secure the M.2 card and M.2 adapter card with a screw.
3.
Connect the SATA cable to the M.2 assembly.
4.
Align the connector on the M.2 assembly with the slot on the system board, and install gently.
5.
Secure the M.2 assembly to the system board with screws.
6.
Install the riser card (on page 49).
7.
Install the access panel (on page 41).
8.
Installation 54