Installing A Full-Length Expansion Board - HP ProLiant DL388p User Manual

Remove the expansion slot blank.
6.
To replace the component, reverse the removal procedure.

Installing a full-length expansion board

Power down the server (on page 21).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Extend the server from the rack (on page 21).
3.
Remove the access panel (on page 22).
4.
Release the full-length expansion board retainer, and then remove the PCI riser cage.
5.
Remove the expansion slot cover
6.
Install the expansion board.
7.
("Removing the expansion slot blanks" on page 63).
Hardware options installation 64