Advertisement
2.
Attach the appropriate reel adapter to the
groomer shaft
(Figure
163 N∙m (110 to 120 ft-lb).
Note:
Use the yellow adapter on the right side
of the machine; use the green adapter on the
left side of the machine. Discard the unused reel
adapter included in the kit.
Note:
When torquing the reel adapter and
drive-box shaft, restrain the drive-box shaft with
the groomer drive-box socket tool, or a wrench,
on the wrench flats at the inboard side of the
groomer drive box
Figure 8
Right side shown
1. Wrench flats (1-3/8 inches) 3. Groomer drive-box socket
2. Hex socket (reel adapter)
3.
Secure the weight bracket to the reel using 2
hex-socket, button-head bolts (3/8 x 3/4 inch)
as shown in
Figure
Note:
Attach the weight bracket to the side of
the reel where you intend to mount the groomer
drive box.
7) and torque it to 150 to
(Figure
8).
tool (137-0920)
9.
1. Weight bracket
2. Hex-socket, button-head
bolt—3/8 x 3/4 inch (2)
3. Groomer drive box (left
drive shown)
g350306
4.
Apply medium-strength thread-locking
compound (such as Blue Loctite® 243) to the
threads of the internal reel shaft
5.
Attach the groomer drive box to the reel shaft
(Figure
9) using the hex-head on the groomer
drive box.
Important:
of the cutting unit are left-handed, and the
reel threads on the right side of the cutting
unit are right-handed.
6.
Restrain the reel for installation; refer to
Restraining the Reel for Installing Threaded
Inserts (page
7.
While the reel is restrained, torque the hex-head
of the drive-box shaft to 135 to 150 N∙m (100
to 110 ft-lb).
Important:
drive-box shaft to 135 to 150 N∙m (100 to 110
ft-lb).
Important:
with heavy wall.
Important:
this step.
Important:
compound to cure for 15 minutes before
continuing the procedure.
6
Figure 9
Left side shown
4. Thread-locking compound
5. Hex-head (Torque to 135
to 150 N∙m (100 to 110
ft-lb))
(Figure
The reel threads on the left side
22).
Torque the hex head of the
You must use a 6-point socket
Do not use an impact wrench for
Allow the thread-locking
g346923
9).
Advertisement
