Toro 140-8369 Installation Instructions

34in Bagging Enhancement Kit
TimeCutter
Model No. 140-8369
Determine the left and right sides of the machine from the normal operating position.
Preparing the Machine
1. Park the machine on a level surface.
2. Disengage the blade-control switch.
3. Move the motion-control levers outward to the P
4. Shut off the engine and remove the key.
5. For easier access, raise the front of the machine and support it using jackstands rated for your machine.
WARNING
Mechanical or hydraulic jacks may fail to support the machine and cause serious injury.
Use jack stands when supporting the machine.
Installing the Kit
© 2021—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
® Riding Mower
ARK
Register at www.Toro.com.
position.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
Form No. 3445-119 Rev A
Installation Instructions
*3445-119*
g347996