Advertisement
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
7
8
9
10
11
Description
No parts required
Torque wrench (Not included)
No parts required
Extended splined insert (right-hand
threads)
Extended splined insert (left-hand
threads)
Flange locknut (3/8 inch)—Model
140-5607 only
Weight bracket
Hex-socket, button-head bolt (3/8 x 3/4
inch)
Right (yellow) reel adapter
Left (green) reel adapter
Groomer drive box
Hex-socket-head bolt
Pivot hub
O-ring
Idler assembly
Bearing shield
Adjuster collar
Stub-shaft assembly
Flange nut (3/4 inch)
Flange locknut (3/8 inch)—Model
140-5605 only
Jam locknut (3/8 inch)—Model 140-5607
only
Left HOC bracket assembly
Right HOC bracket assembly
Shoulder bolt
Hardened washer
Flange locknut (3/8 with 5/8 hex)
Cap
Bolt (1/4 x 1-1/2 inches)
Jam nut
Shaft clamp
Groomer reel (order separately)
Washer (Part No. 3256-24, not included)
Hydraulic fitting—45° (Part No.
340–101; sold separately)
Qty.
–
Prepare the machine.
–
Gather the tools required for setup.
Determine where on the cutting unit to
–
install the groomer.
1
1
Prepare the cutting unit.
2
1
2
Install the groomer drive box and weight.
1
1
1
2
1
1
1
2
1
Install the idler assembly.
1
1
2
2
1
1
Install the HOC bracket assemblies and
2
the front roller.
1
2
Install the groomer drive cap (For
1
universal groomer assemblies with no
rear roller brush kit installed only).
4
4
Install the groomer assembly (ordered
separately) and optional broomer kit.
4
1
–
Adjust the groomer spring force.
Install the angled fitting (for Reelmaster
3550 and 3555 machines, #1 front,
1
center cutting location and kit Model
145-5605).
2
Use
Advertisement
