Advertisement
2.
Install the cap as shown in
Figure 15
1. Cap
3.
If you are installing the groomer at the left side of
the machine, perform the following
A.
Remove the hex-socket screw that secures
the clutch knob to the actuator shaft.
B.
Remove the clutch-knob assembly and flip
it over
(Figure
C.
Assemble the clutch knob to the actuator
shaft with the hex-socket screw.
Figure 16
1. Hex-socket bolt
Figure
15.
2. Apply Green Loctite 609®
(Figure
16).
2. Clutch-knob assembly
9
Installing the Groomer
Assembly and Optional
Broomer Kit
Groomer and Broomer Kits Come
g346927
Separately
Parts needed for this procedure:
16):
4
Bolt (1/4 x 1-1/2 inches)
4
Jam nut
4
Shaft clamp
1
Groomer reel (order separately)
Installing the Groomer Kit
Ordered Separately
Model Number
03771
03772
03778
03766
03767
1.
Obtain a groomer blade cartridge kit or a brush
kit appropriate for your needs and cutting unit;
refer to the table above.
g298196
2.
Line up the groomer assembly with the
drive-stub shafts of the groomer drive box and
idler assembly
10
Groomer Kit
18-inch Groomer Blade Cartridge Kit
22-inch Groomer Blade Cartridge Kit
27-inch Groomer Blade Cartridge Kit
18-inch Fairway QC Grooming Brush Kit
22-inch Fairway QC Grooming Brush Kit
(Figure
17).
Advertisement
