Contacting Customer Support - Lexmark CX522ade User Manual

Troubleshooting
5
Compare the Copy Quick Test page with the original document.
Note: If the margins of the test page are different from the original document, then adjust Left Margin and
Top Margin.
6
Repeat step 4 and
Adjusting ADF registration
1
From the control panel, navigate to:
Settings > Device > Maintenance > Configuration Menu > Scanner Configuration > Scanner Manual
Registration
For non-touch-screen printer models, press
2
From the Print Quick Test menu, select Start.
3
Place the Print Quick Test page on the ADF tray.
4
Select Front ADF Registration or Rear ADF Registration.
Notes:
•
To align Front ADF Registration, place the test page faceup, short edge first into the ADF.
•
To align Rear ADF Registration, place the test page facedown, short edge first into the ADF.
5
From the Copy Quick Test menu, select Start.
6
Compare the Copy Quick Test page with the original document.
Note: If the margins of the test page are different from the original document, then adjust Horizontal
Adjust and Top Margin.
7
Repeat step 5 and

Contacting customer support

Before contacting customer support, make sure to have the following information:
•
Printer problem
•
Error message
•
Printer model type and serial number
Go to http://support.lexmark.com
support documentation, drivers, and other downloads.
Technical support via telephone is also available. In the U.S. or Canada, call 1-800-539-6275. For other countries
or regions, go to http://support.lexmark.com.
step 5 until the margins of the Copy Quick Test page closely match the original document.
step 6 until the margins of the Copy Quick Test page closely match the original document.
to receive e‑mail or chat support, or browse through the library of manuals,
to navigate through the settings.
232