Lexmark CX522ade User Manual page 94

Understanding the printer menus
Menu item
Memory Use
All receive
Mostly receive
Equal*
Mostly send
All send
Cancel Faxes
Allow*
Don't Allow
Caller ID
Off
On*
Alternate
Fax Number Masking
Off*
From Left
From Right
Digits to Mask
0–58 (0*)
Enable Line Connected
Detection
Off
On*
Enable Line In Wrong Jack
Detection
Off*
On
Enable Extension in Use
Support
Off
On*
Optimize Fax Compatibility
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the amount of internal printer memory allocated for faxing.
Note: This menu item prevents memory buffer conditions and failed faxes.
Cancel outgoing faxes before they are transmitted, or cancel incoming faxes
before they finish printing.
Show the telephone number of the person sending the fax.
Specify the format for masking an outgoing fax number.
Specify the number of digits to mask in an outgoing fax number.
Determine whether a telephone line is connected to the printer.
Notes:
•
Detection takes place when turning on the printer and before each call.
•
This menu item does not appear if Fax Transport is set to T.38.
Determine whether a telephone line is connected to the correct port on the
printer.
Notes:
•
Detection takes place when turning on the printer and before each call.
•
This menu item does not appear if Fax Transport is set to T.38.
Determine whether a telephone line is used by another device such as another
phone on the same line.
Notes:
•
This menu item is monitored continuously after turning on the printer.
•
This menu item does not appear if Fax Transport is set to T.38.
Configure the printer fax functionality for optimal compatibility with other fax
machines.
94