Table of Contents
Advertisement
User Authentication and Accounting (User Login, Job Accounting) > Setting an account. [Local]
Setting Processing When the Limit is Exceeded
This specifies how the machine behaves when the counter has reached the limit of restriction.
Item
*1
Immediately
Subsequently
Alert Only
*1 If send or box storage is in progress, the next job will be prohibited.
1
Display the screen.
1
[System Menu / Counter] key > [User Login/Job Accounting]
NOTE
If the user authentication screen appears, enter your login user name and login password and select [Login].
For this, you need to log in with administrator privileges. The factory default login user name and login password
are set as shown below.
Login User Name
d-COPIA 255MF:2500
Login Password
d-COPIA 255MF:2500
2
[Job Accounting Settings] > [Default Setting] > [Apply Limit]
2
On
1
Select [Immediately], [Subsequently], or [Alert Only].
2
Select [OK].
Editing an Account
1
Display the screen.
1
[System Menu / Counter] key > [User Login/Job Accounting]
NOTE
If the user authentication screen appears, enter your login user name and login password and select [Login].
For this, you need to log in with administrator privileges. The factory default login user name and login password
are set as shown below.
Login User Name
d-COPIA 255MF:2500
Login Password
d-COPIA 255MF:2500
2
[Job Accounting Settings] > [Accounting List]
Job stops when the counter reaches its limit.
Printing/scanning of the job continues but the subsequent job will be rejected.
Job continues while displaying an alert message.
9-31
Description
Advertisement
Table of Contents
