Convenient Copy Functions; Interrupting A Copy Run; Interrupt Copy - Sharp MX-B402 Operation Manual

CONVENIENT COPY FUNCTIONS

This section explains convenient copy functions such as interrupting a copy run, changing the order of reserved copy
jobs, and storing copy settings in a program.

INTERRUPTING A COPY RUN

(Interrupt copy)

When you need to make an urgent copy and the machine is busy with a long copy run or other job, use interrupt copy.
Interrupt copy temporarily stops the job in progress and lets you perform the interrupt copy job first.
Copies in progress from tray 4.
Ready to scan for next copy job.
1
Exposure
Auto
Copy Ratio Original
100%
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
Place the original in the automatic document feeder.
2
☞
PLACING ORIGINALS IN THE AUTOMATIC DOCUMENT FEEDER
After placing the original, specify the original size.
☞
ORIGINAL SIZES
Select copy settings and press the [START] key.
3
The interrupt copy job begins.
When the interrupt copy job is completed, the interrupted job resumes.
4
To cancel scanning and copying...
Press the [STOP] key (
Interrupt
Special Modes
2-Sided Copy
Plain
8½x11
Output
1. 8½x11
2. 5½x8½
File
3. 8½x14
4. 8½x11
Quick File
Paper Select
Auto
8½x11
Preview
Plain
(page 2-29)
).
Touch the [Interrupt] key.
7
The [Interrupt] key does not appear while an original is being
scanned.
(page 1-37)
2-99
COPIER
Contents