Sending Both Sides Of A Card As Asingle Page (Card Shot) - Sharp MX-B402 Operation Manual

SENDING BOTH SIDES OF A CARD AS A
SINGLE PAGE (Card Shot)
This function lets you send the front and reverse sides of a card as a single page, without the need to send each side
separately.
Originals
Front
Back
• For the MX-B402, when using card shot, the original must be scanned on the document glass.
• For the MX-B402SC, depending on the card type, some cards cannot be used with the automatic document feeder.
MX-B402:
1
MX-B402SC:
Enter the destination fax number.
2
☞
ENTERING DESTINATIONS
Select the special modes.
(1) Touch the [Special Modes] key.
3
(2) Touch the [Card Shot] key.
☞
SPECIAL MODES
Transmission
(page 4-16)
(page 4-71)
Transmitted image
MX-B402:
Place the original face down on the document glass.
MX-B402SC:
Place the original face up in the document feeder tray, or face
down on the document glass.
When the original is a different size than the size setting, set
the original size.
☞
SPECIFYING THE ORIGINAL SCAN SIZE AND SEND
SIZE (page 5-56)
4-79
FACSIMILE
Contents