Report Printer - Sharp UP-3500 Instruction Manual

I I I I I Report printer
(1) Select the PGM1 or PGM2 mode and touch the [2 POS SETTING] to perform the programming.
(2) In the PGM1 mode, touch the [4 PRINTERS] button to display the menu, and touch the [4 REPORT
PRINTER] button to program for the report printer.
(2)' In the PGM2 mode, touch the [9 SYSTEM] button to display the menu, and touch the [1 PRINTERS]
button to display the detail menu. Then touch the [4 REPORT PRINTER] button to program.
(3) Touch the required programming item, and enter or select each parameter and touch the [ENTER] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text
TERMINAL#
CHANNEL#
PRINTER NAME
AUTO CUTTER
PAPER SHEET
LOGO PRT REPORT
CASHIER NAME
DATA PRINT
HEADER LOGO PRINT
➝
(4 PRINTERS 4 REPORT PRINTER .......... PGM1)
➝
(9 SYSTEM 1 PRINTERS
[0] : [SELF TERMINAL No.] : This means local device.
[1-254 (EXCEPT SELF TERMINAL NO.)] : RS232 connection (SHARED DEVICE)
TCP/IP (4th octet of IP address)
0: not connect/TCP/IP connection
1-5 : RS232 connection (channel#)
TM-T85/T88(3)/T88 mark4
TM-300
TM-U200/230
TM-T88(3)+LOGO
TM-U220+LOGO
ER-01PU
TM-T90
NO: Disables auto cutter
YES: Enables auto cutter
TWO OR MORE: Two or more copy sheet
ONE SHEET: One sheet
PRINT: Prints the logo on report printer
NOT PRINT: Does not print the logo on report printer
NOT PRINT: Does not print the cashier name
PRINT: prints the cashier name
DISABLE: Disables data transaction
ENABLE: Enables data transaction
PRE-PRINT: Pre-print the header logo
EACH ISSUE: Header logo is printed at each receipt issuing.
➝
4 REPORT PRINTER .......... PGM2)
Parameter
245