Selecting An Operating Mode; Operating Modes - Sharp UP-3500 Instruction Manual

Selecting an Operating Mode

The POS terminal will display the following listing by touching the [MODE] key.
Mode selection window:
I I I I I Operating modes
You can select any mode other than REG from the list in the mode selection window. Your POS terminal
supports the following operating modes:
REG mode
Unit PRICE mode
OP X/Z mode
X1 mode
Z1 mode
X2 mode
Z2 mode
X3 mode
Z3 mode
X4 mode
Z4 mode
PGM1 mode
PGM2 mode
OPEN STORE
CLOSE STORE
E-PAYMENT JOBS
E-PAY REPORTS
SD CARD mode
This mode allows you to enter various sales information. The mode selection window
does not list this mode. To select this mode from the mode selection window, touch the
[EXIT] key.
This mode allows you to program unit price of PLUs.
This mode allows cashiers to take X or Z reports on their sales information. It can also
be used for employee time function.
This mode is used to take various daily reading reports (X1 reports).
This mode is used to take various daily resetting reports (Z1 reports).
This mode is used to take various weekly or monthly reading reports (X2 reports).
This mode is used to take various weekly or monthly resetting reports (Z2 reports).
This mode is used to take various weekly or monthly reading reports (X3 reports).
This mode is used to take various weekly or monthly resetting reports (Z3 reports).
This mode is used to take various weekly or monthly reading reports (X4 reports).
This mode is used to take various weekly or monthly resetting reports (Z4 reports).
This mode allows you to program those items which need to be changed often such as
unit prices and discount percentages.
This mode allows you to program those items which can be programmed in the PGM1
mode and do not require frequent changes such as date, time, and terminal functions.
Open store operation
Close store operation
E-PAYMENT jobs
E-PAYMENT reports
This mode provides data communications between the POS terminal and your personal
computer using a SD memory card
15