Receipt/Report Printer - Sharp UP-3500 Instruction Manual

I I I I I Receipt/report printer
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [DEVICE CONFIG] button to display the menu, and touch the [RECEIPT/REPORT
PRINTER] button to program details.
(3) Select the required programming item, and enter or select each parameter, then touch the [ENTER]
key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text
TERMINAL#
CHANNEL#
PRINTER
AUTO CUTTER
HEAD LOGO PRINT
RCPT LENGTH
(DEVICE CONFIG ➝ RECEIPT/REPORT PRINTER ....... PGM2)
[0] : [SELF TERMINAL No.] : This means local device.
[1-254 (EXCEPT SELF TERMINAL NO.)] : RS232 connection (SHARED DEVICE)
TCP/IP (4th octet of IP address)
0: not connect/TCP/IP connection
1-5 : RS232 connection (channel#)
ER-01PU
TM-T90
TM-H6000
TM-T88(3)/T88(4)
TM-U200/230
TM-T88(3)(4)+LOGO
NO: Disables auto cutter
YES: Enables auto cutter
PRE-PRINT: Pre-print the header logo
EACH ISSUE: Header logo is printed at each receipt issuing.
Minimum length for bill on receipt (0 to 30 lines)
Parameter
279