Condiment Ignore; Date And Time; Glu Start/End Code - Sharp UP-3500 Instruction Manual

I I I I I Condiment ignore
(1) Select the PGM2 mode and touch the [2 POS SETTING] to perform the programming.
(2) Touch the [7 TERMINAL] button to display the menu, and touch the [3 TERMINAL] button to display
the detail menu. Then touch the [6 CONDIMENT IGNORE] button to program the useless condiment
tables.
(3) Enter the start useless condiment table number and/or end useless condiment table number and touch
the [ENTER] key.
(4) To terminate the programming, touch the [EXIT] key.
Text
START USELESS
END USELESS
I I I I I Date and time
(1) Select the PGM2 mode and touch the [2 POS SETTING] to perform the programming.
(2) Touch the [7 TERMINAL] button to display the menu, and touch the [3 TERMINAL] button to display
the detail menu. Then touch the [7 DATE AND TIME] button to program the date/time data.
(3) Enter the date and/or time data and touch the [ENTER] key.
(4) To terminate the programming, touch the [EXIT] key.
Text
DATE
TIME
AM/PM SELECT
I I I I I GLU start/ end code
(1) Select the PGM2 mode and touch the [2 POS SETTING] to perform the programming.
(2) Touch the [7 TERMINAL] button to display the menu, and touch the [3 TERMINAL] button to display
the detail menu. Then touch the [8 GLU CODE BY TERMINAL] button to program the GLU code.
(3) Enter the start GLU code and/or end GLU code and touch the [ENTER] key.
(4) To terminate the programming, touch the [EXIT] key.
Text
START CODE
END CODE
220
(7 TERMINAL ➝ 3 TERMINAL ➝ 6 CONDIMENT IGNORE .......... PGM2)
Start useless condiment table: max. 3 digits (1 to 999/0)
End useless condiment table: max. 3 digits (1 to 999/0)
➝
(7 TERMINAL 3 TERMINAL
Date: max. 6 digits (mmddyy) : month/day/year
Time: max. 4 digits : hour 2 digits (01 to 12), minute 2 digits (00 to 59)
Time selection (AM/PM);
AM:
PM:
➝
(7 TERMINAL 3 TERMINAL
GLU start code: max. 8 digits (1 to 99999999)
GLU end code: max. 8 digits (1 to 99999999)
Parameter
➝
7 DATE AND TIME .......... PGM2)
Parameter
➝
8 GLU CODE BY TERMINAL .......... PGM2)
Parameter