Report Printer - Sharp UP-3500 Instruction Manual

I I I I I Report printer
(1) Select the PGM1 or PGM2 mode and touch the [2 POS SETTING] to perform the programming.
(2) In the PGM1 mode, touch the [4 PRINTERS] button to display the menu, and touch the [4 REPORT
PRINTER] button to program for the report printer.
(2)' In the PGM2 mode, touch the [9 SYSTEM] button to display the menu, and touch the [1 PRINTERS]
button to display the detail menu. Then touch the [4 REPORT PRINTER] button to program.
(3) Touch the required programming item, and enter or select each parameter and touch the [ENTER] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text
TERMINAL#
CHANNEL#
PRINTER NAME
AUTO CUTTER
PAPER SHEET
LOGO PRT REPORT
CASHIER NAME
DATA PRINT
HEADER LOGO PRINT
184
➝
(4 PRINTERS 4 REPORT PRINTER .......... PGM1)
➝
(9 SYSTEM 1 PRINTERS
Parameter
[0] : [SELF TERMINAL No.] :
This means local device.
[1-254 (EXCEPT SELF TERMINAL NO.)] :
RS232 connection (SHARED DEVICE)
TCP/IP (4th octet of IP address)
0 : not connect/TCP/IP connection
1-5 : RS232 connection (channel#)
TM-T85/T88(3)/T88 mark4/TM-300
/TM-U200/230
TM-T88(3)+LOGO/TM-U220+LOGO/ER-01PU
/TM-T90
NO/YES
TWO OR MORE/ONE SHEET
PRINT/NOT PRINT
NOT PRINT/PRINT
DISABLE/ENABLE
PRE-PRINT/EACH ISSUE
➝
4 REPORT PRINTER .......... PGM2)
Device assign
(terminal#)
Device assign
(channel#)
Kind of printer
Auto cutter
Paper type
Logo print on report printer
Message print with cashier name
Enable or disable data transmission
Header logo print timing
Classification
www.cashregisters.net