Adjusting The Maximum Speed Range - Toro GrandStand 18840TE Operator's Manual

5. Remove the top plug and bottom plug. Allow
the fluid to drain.
Figure 54
6. Install the bottom plug and torque it to 7 to 8
N∙m (62 to 70 in-lb).
7. Remove a side plug.
8. Add fluid, as specified at the beginning of this
procedure, through the top hole until the level
reaches the side plug opening.
Figure 55
9. Install the top plug and side plug . Torque them
to 7 to 8 N∙m (62 to 70 in-lb).
10. Install the tire and torque the lug nuts to 75 to
88 N∙m (55 to 65 ft-lb).
11. Repeat for the other transmission.
Adjusting the Maximum
Speed Range
Note:
The InfoCenter displays only 2 items at a time;
however, the following figures show the full menus
for context.
1. Park the machine on a level surface, disengage
the PTO, and move the motion-control levers
outward to the P
2. Enable access to protected menus; refer to
Accessing Protected Menus (page
3. In the M
AIN MENU
press the
g380054
g380053
38
position.
ARK
14).
, scroll down to S
ERVICE
button.
Figure 56
and
g376300