Pre-Maintenance Procedures; Accessing Internal Components - Toro GrandStand 18840TE Operator's Manual

Pre-Maintenance
Procedures
Accessing Internal
Components
Service Interval: Yearly—Apply anti-seize compound
to the cushion knobs.
You can release the cushion for rear access to the
machine for maintenance or adjustment.
1. Lower the platform.
2. Loosen the twist knobs on each side of the
machine.
Figure 43
1. Twist knob
3. Lower the cushion to the platform.
4. Remove the rear access cover.
Figure 44
5. Perform any maintenance or adjustment on the
machine.
6. Install the rear access cover.
g375719
2. Cushion
g377627
7. Raise the cushion, and slide it onto the pins on
both sides of the machine.
8. Tighten the twist knobs.
31