Table of Contents
Advertisement
Connecting to a Power Source
DANGER
Contact with water while charging the
machine could cause electric shock, causing
injury or death.
• Do not handle the plug or the charger with
wet hands or while standing in water.
• Do not charge the batteries in the rain or in
wet conditions.
To reduce the risk of electric shock, this charger has a
3-prong grounded plug (type B). If the plug does not
fit into the wall receptacle, other grounded plug types
are available; contact an Authorized Service Dealer.
Do not change the charger or the power-supply-cord
plug in any way.
Important:
Check the power supply cord
periodically for holes or cracks in the insulation.
Do not use a damaged cord. Do not run the cord
through standing water or wet grass.
1.
Insert the charger plug on the power-supply
cord into the matching input power socket on
the charger.
WARNING
A damaged charger cord can cause an
electrical shock or a fire.
Thoroughly inspect the power supply
cord before using the charger. If the cord
is damaged, do not operate the charger
until you obtain a replacement.
2.
Insert the wall plug end of the power supply cord
into a grounded electrical outlet.
Charging the Lithium-Ion Batteries
CAUTION
Attempting to charge the batteries with a
charger not provided by Toro can result in
excessive heat and other related product
malfunctions, which can lead to property
damage and/or injury.
Use the Toro-provided chargers to charge the
batteries.
Recommended temperature range for charging:
0° to 45°C (32° to 113°F)
Important:
Charge the batteries only in
temperatures that are within the recommended
range.
Note:
The charger will not function in temperatures
exceeding the minimum or maximum temperatures.
1.
Park the machine in the designated location for
charging.
2.
Shut off the machine and remove the key.
Note:
The battery-disconnect must remain in
the O
position to charge the batteries.
N
3.
Ensure that the connectors are free of dust and
debris.
4.
Slide the charger-output connector into the
charger connector on the machine.
1. Machine connector
28
Figure 41
2. Charger connector
g355480
Advertisement
Table of Contents
