About Your Heater; General Overview: Rhfe-952 / Rhfe-1253 - Rinnai RHFE 952 ETRN Operation & Installation Manual

ABOUT YOUR HEATER

GENERAL OVERVIEW: RHFE - 952 / RHFE - 1253
A
B
2
3
8
Push button control panel

ON / OFF button
A
Standby / ON button:
B
Mesh dress guard (as part of

fascia)
Flame window

Warm air discharge vent

Return air vent

Remote (IR) control receiver

window
Viewing window for error

code display
Remote (IR) Control

Standby / ON button:
C
Flame Up / Down buttons:
D
Room temperature display
E
Rinnai
1
C
D
E
Controls appliance operation between Standby and ON modes.
Controls appliance operation between ON and OFF.
See "Remote Control Operation" on page 10
Ceramic log set and burner media
Dust filter mesh is fixed to the inlets of the room air return.
(Green Indicator) Flashes during the pilot ignition and glows solid when
pilot is established, going out once heating operation commences.
Flashes to acknowledge remote control inputs.
Located behind the fascia. See "Error Codes" on page 12
See "Remote Control Operation" on page 10.
See "Remote Control Operation" on page 10.
Displays the current temperature of the room in which the control is
located. See "Remote Control Operation" on page 10.
4
7
5
8
6
RHFE 952/1253 OIM