Tv Installation - Rinnai RHFE 952 ETRN Operation & Installation Manual

TV INSTALLATION

The RHFE 952 & RHFE 1253 has a fan that distributes warm air from the top of the appliance out into the room.
As warm air is dispersed outwards and not directly upwards, installation of a TV may be an option.
The general rule for television installations is that the bottom of the television should be at least 400-450 mm above
the fire.
For a TV mounted directly above the fire, the mantel must be at least the depth of the TV to deflect heat away.
It is the responsibility of the owner to confirm with the TV manufacturer the suitability of such an installation and
any conditions in the TV warranty that may apply to this.
Use either a shelf or mantel below the TV or ornament or alternately you can construct a recess
to mount TV or ornaments in. Check the manufacturer's installation instructions for these items
IDEA and ensure the recess is suitable.
TV Installation with
Mantel
At least the
depth of the TV
RINNAI DOES NOT TAKE ANY RESPONSIBILITY FOR ANY DAMAGE OCCURRING
TO ANY ITEMS INSTALLED ABOVE AND IN THE VICINITY OF THE HEATER.
WARNING
INSTALLATION OF TV OR ORNAMENTATION ABOVE THE HEATER
The installation of electrical appliances above and in the vicinity of the heater such as, but not
CAUTION
limited to, TVs, Home Theatre Screens, Speakers, etc., MUST comply with their manufacturer's'
instructions. It is the responsibility of the installer/end-user to check the installation instructions
of these items and to ensure the location is suitable.
This caution also extends to, but is not limited to, ornaments such as: Paintings, Prints,
Photographs, Tapestries, Mirrors, Stuffed Animals, etc.
Please note the recommended clearances in the diagrams above. Wall surface temperature
may be elevated directly above the appliance and may discolour paint finishes or distort vinyl
coverings. For durability of surfaces consult the relevant manufacturer's specification.
Rinnai
GENERAL INSTALLATION INFORMATION
TV Installation with
Recess
400 mm
minimum
23
400 mm
minimum
RHFE 952/1253 OIM