About Your Arriva 752 - Rinnai Arriva 752 Operation Manual

About your Arriva 752

Congratulations on the purchase of your Rinnai Arriva gas fireplace. We hope you love this product
as much as we do, and on the off chance that something does go wrong, or if you need help, we're
only a phone call away.
Auto overheat discharge vent
Room air return
Double glazed
frame window
Louvre, warm air discharge
Positioning the Arriva 752
To gain maximum heating advantage from the bottom air discharge, the Arriva looks and performs
best when installed close to the floor. If installed higher up the wall, the movement of air from the
convection fan, depending on the room configuration could create drafts.
Power failure
If power is disrupted while the fire is operating, once power is restored, it will go into power failure
mode—flashing zeros in the error display, and a green LED* on the control panel.
To reset the fire, press the On/Off button on the control panel twice, or use the remote control and
press the Standby/On button once, to go into standby, and then a second time to turn the fire back
on.
* Control panel LED colours; red = on, green = standby, green flashing = error code indication
6 | Arriva 752 operation guide: 12219-C 03-20
Control panel
Remote receiver window for
infra red remote (5 m range)
Room
air
return
Error display
Displays error codes
Room air return
Burn media
Blockage indicator for filter
and louvre blockages
Safety devices
Your Rinnai Arriva has the following safety
devices:
• flame failure sensing system
• pressure relief
• overheat safety switch
• air temperature sensor
• thermal fuse
• overcurrent fuse
• spark detection
Operation indicator*
Indicates operation status
Timer indicator
Indicates timer program status
On/Off button
Turns the heater on or off