Holding/Recalling of Transaction
Hold/Recall Function
This function can be used during entry of a transaction to start entry of the next transaction. For example, if it
seems to take time for a guest to make payment, by pressing the HOLD/RECALL key or touching "HOLD/RECALL"
in the keyboard area of the display, you can start entry of a transaction with the next guest. While the former
transaction is held, the red mark "HOLD" appears in the top left corner of the display indicating that the transaction
is held. You can resume the transaction with the former guest by pressing or touching the key again (RECALL).
If you like to use this function, consult your authorized SHARP dealer.
Procedure
For one guest
HOLD/RECALL
(Recall)
(Finalization)
CA/AT
HOLD/RECALL
For the next guest
HOLD/RECALL
(Recall)
(Finalization)
CA/AT
— 53 —